Grasshopper

algorithmic modeling for Rhino

00 | Honeybee
01 | Daylight | Material
02 | Daylight | Light Source
03 | Daylight | Recipes
04 | Daylight | Daylight
05 | Energy | Building Program
06 | Energy | Material | Construction
07 | Energy | Schedule
08 | Energy | Set Zone Properties
09 | Energy | HVACSystems
10 | Energy | Energy
11 | THERM
12 | Developers
13 | WIP

Assign HVAC System

Component Index > Honeybee > 09 | Energy | HVACSystems > Assign HVAC System

Use this component to assign OpenStudio Systems to your HBZones. By default, all HBZones are assigned an Ideal Air Loads system and this component can be used to change this to a real system from the OpenStudioHVACSystemsList component.
This component is also used to adjust the features of the HVAC system using the _airDetails_, _heatingDetails_, and _coolingDetails_. Without the inputs to these Details, template OpenStudio systems will be used.

Inputs

NameIDDescriptionType
_HBZones_HBZonesThe HBZones for which you want to change/adjust the HVAC system.Goo
_HVACSystems_HVACSystemsA HVAC system template from the "Honeybee_HVACSystemsList" component. ASHRAE recommends using the following baseline systems for different building types and fuel sources: BUILDING TYPE FOSSIL FUEL/HYBRID/PURCHASED HEAT ELECTRIC ONLY Residential 1: PTAC | Residential 2: PTHP | Residential Non-Res 3 Floors 3: Packaged Single Zone - AC 4: Packaged Single Zone - HP Non-Res 4-5 Floors 5: Packaged VAV w/ Reheat 6: Packaged VAV w/ PFP Boxes Non-Res >5 Floors 7: VAV w/ Reheat 8: VAV w/ PFP Boxes Heated Only Sotrage 9: Warm Air Furnace - Gas Fired 10: Warm Air Furnace - ElectricGoo
_airDetails__airDetails_Parameters from the "Honeybee_HVAC Air Details" component. Use these to define the features of the ventilation component (or air side) of the HVAC system.Goo
_heatingDetails__heatingDetails_Parameters from the "Honeybee_HVAC Heating Details" component. Use these to define the features of the heating plant (or hot water side) of the HVAC system.Goo
_coolingDetails__coolingDetails_Parameters from the "Honeybee_HVAC Cooling Details" component. Use these to define the features of the cooling plant (or chilled water side) of the HVAC system.Goo

Outputs

NameIDDescriptionType
readMe!readMe!Script variable OSHVACSystemsGoo
HBZonesHBZonesHBZones that have been modified to have the assigned _HVACSystems.Goo

© 2018   Created by Robin Rodricks and Andrew Heumann.   Hosted by

Badges  |  Report an Issue  |  Terms of Service