Grasshopper

algorithmic modeling for Rhino

00 | Honeybee
01 | Daylight | Material
02 | Daylight | Light Source
03 | Daylight | Recipes
04 | Daylight | Daylight
05 | Energy | Building Program
06 | Energy | Material | Construction
07 | Energy | Schedule
08 | Energy | Set Zone Properties
09 | Energy | HVACSystems
10 | Energy | Energy
11 | THERM
12 | Developers
13 | WIP

Lighting control Recipe

Component Index > Honeybee > 04 | Daylight | Daylight > Lighting control Recipe

Daysim electrical lighting control. Check this link for more information about lighting control types. http://daysim.ning.com/page/keyword-lighting-control

Inputs

NameIDDescriptionType
_controlType__controlType_Lighting controlType: [0] Manual on/off switch, [1] Automate switch off occupancy sensor, [2] Always on during active occupancy hours, [3] Manual On/off with auto Dimming [4] Auto dimming with swith off occupancy sensor [5] Always on during active occupancy hours with auto dimmingGoo
sensorPoints_sensorPoints_Selected list of test points that indicates where lighting sensor points are located.Goo
_lightingPower__lightingPower_Lighting power in watts. Default is 250 w.Goo
_lightingSetpoint__lightingSetpoint_Target illuminance for the space. Default is 300 lux.Goo
_ballastLossFactor__ballastLossFactor_Minimum electric dimming level in percentages.Goo
_standbyPower__standbyPower_Standby power in watts. Default is 3 w.Goo
_delayTime__delayTime_Switch-off delay time in minutes. Default is 5 minutes.Goo

Outputs

NameIDDescriptionType
lightingControlGrouplightingControlGroupLighting control RecipeGoo

© 2018   Created by Robin Rodricks and Andrew Heumann.   Hosted by

Badges  |  Report an Issue  |  Terms of Service