algorithmic modeling for Rhino

00 | Honeybee
01 | Daylight | Material
02 | Daylight | Light Source
03 | Daylight | Recipes
04 | Daylight | Daylight
05 | Energy | Building Program
06 | Energy | Material | Construction
07 | Energy | Schedule
08 | Energy | Set Zone Properties
09 | Energy | HVACSystems
10 | Energy | Energy
11 | THERM
12 | Developers
13 | WIP

Skylight Based on Ratio

Component Index > Honeybee > 00 | Honeybee > Skylight Based on Ratio

Use this component to generate windows for a HBSurface or HBZone based on a desired window-to-wall ratio. In addition to generating window geometry that corresponds with the input ratio, this component also allows you a fairly high level of control over the window geometry.
The first way in which you gain additional control over geometry is the option of whether you want to generate a single window for each surface, which is good for making energy simulations run fast, or you want to use the glazig ratio to create several windows distributed across the surfaces, which is often necessary to have accurate daylight simulations or high-resolution thermal maps.
If you break up the window into several ones, you also have the ability to set the distance between each of the windows along the surface.
If you input wall surfaces that have perfectly horizontal tops and/or bottoms, you also have access to a number of other other inputs such as window height, the sill height, and whether you want to split the glazing vertically into two windows.


_HBObjects_HBObjectsHoneybee thermal zones or surfaces for which glazing should be generated.Goo
_skyLightRatio_skyLightRatioIf you have input a full zone or roof surface as your HBObjects, use this input to generate skylights on the roof surfaces. A single window for each surface is good for making energy simulations run fast while several distributed windows is often necessary to have accurate daylight simulations or high-resolution thermal maps. The default is set to "True" to generate multiple distributed windows.Goo
breakUpSkylight_breakUpSkylight_Set to "True" to generate a distributed set of multiple windows for skylights and set to "False" to generate just a single window per roof surface.Goo
skyLightBreakUpDist_skyLightBreakUpDist_An optional number in Rhino model units that sets the distance between individual skylights when the breakUpSkylight_ input above is set to 'True'. The default is set to 3 meters.Goo
EPConstruction_EPConstruction_A optional text string of an EnergyPlus construction name that sets the material construction of the window. The default will assign a generic double pane window without low-e coatings.Goo
RADMaterial_RADMaterial_A optional text string of an Radiance glass material name that sets the material of the window.Goo
_runIt_runItset runIt to True to generate the glazingGoo


HBObjWGLZHBObjWGLZNewhoneybee zones that contain glazing surfaces based on the parameters above.Goo

© 2018   Created by Robin Rodricks and Andrew Heumann.   Hosted by

Badges  |  Report an Issue  |  Terms of Service