Grasshopper

algorithmic modeling for Rhino

00 | Honeybee
01 | Daylight | Material
02 | Daylight | Light Source
03 | Daylight | Recipes
04 | Daylight | Daylight
05 | Energy | Building Program
06 | Energy | Material | Construction
07 | Energy | Schedule
08 | Energy | Set Zone Properties
09 | Energy | HVACSystems
10 | Energy | Energy
11 | THERM
12 | Developers
13 | WIP

Therm Material

Component Index > Honeybee > 11 | THERM > Therm Material

Use this component to create a custom THERM material, which can be plugged into the "Honeybee_Create Therm Polygons" component.

Inputs

NameIDDescriptionType
_materialName_materialNameA text name for your THERM Material.Goo
_conductivity_conductivityA number representing the conductivity of the THERM material in W/m-K.Goo
absorptivity_absorptivity_A number between 0 and 1 that represents the solar absorptivity of the material. The default is set to 0.5.Goo
emissivity_emissivity_A number between 0 and 1 that represents the emissivity of the material. The default is set to 0.9.Goo
cavityModel_cavityModel_An integer that represents the cavity model to use for the material (if it is a gas). If you are creating a solid material, just leave this input blank. Cavity models (4 - ISO 15099) and (5 - ISO 15099 ventilated) are used for most situations. Choose from the following options: 0 - NFRC 1 - CEN 2 - CEN (slightly ventilated) 3 - NFRC with user dimensions 4 - ISO 15099 5 - ISO 15099 ventilatedGoo
RGBColor_RGBColor_An optional color to set the color of the material when you import it into THERM.Goo

Outputs

NameIDDescriptionType
thermMaterialthermMaterialA therm material that can be plugged into the "Honeybee_Create Therm Polygons" component.Goo

© 2018   Created by Robin Rodricks and Andrew Heumann.   Hosted by

Badges  |  Report an Issue  |  Terms of Service