Grasshopper

algorithmic modeling for Rhino

0 | Ladybug
1 | AnalyzeWeatherData
2 | VisualizeWeatherData
3 | EnvironmentalAnalysis
4 | Renewables
5 | Extra
6 | Developers
7 | WIP

ENVI-Met Soil Plant Source

Component Index > Ladybug > 7 | WIP > ENVI-Met Soil Plant Source

Use this component to generate ENVI-Met inputs for "LB ENVI-Met Spaces".
Some 'plant3Did_' could not work properly.

Inputs

NameIDDescriptionType
basePoint_basePoint_Input a point here to move ENVI-Met grid. If no input is provided it will be origin point.Goo
--------------------------(...)Goo
_soil__soil_Geometry that represent ENVI-Met soil. Geometry must be a Surface or Brep on xy plane.Goo
_plant2D__plant2D_Geometry that represent ENVI-Met plant 2d. Geometry must be a Surface or Brep on xy plane.Goo
_plant3D__plant3D_Geometry that represent ENVI-Met plant 3d. Geometry must be a Surface or Brep on xy plane.Goo
_source__source_Geometry that represent ENVI-Met plant 3d. Geometry must be a Surface or Brep on xy plane.Goo
--------------------------(...)Goo
_soilId__soilId_ENVI-Met profile id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. L0Goo
_plantId__plantId_ENVI-Met plant id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. XXGoo
_plant3Did__plant3Did_ENVI-Met plant3D id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. PI,.Pinus PineaGoo
_sourceId__sourceId_ENVI-Met source id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. FTGoo

Outputs

NameIDDescriptionType
outreadMe!...String
envimetPlantsenvimetPlantsConnect this output to "ENVI-Met Spaces" in order to add plants to ENVI-Met model.Goo
envimetSoilsenvimetSoilsConnect this output to "ENVI-Met Spaces" in order to add soils to ENVI-Met model.Goo
envimetSourcesenvimetSourcesConnect this output to "ENVI-Met Spaces" in order to add sources to ENVI-Met model.Goo

© 2018   Created by Robin Rodricks and Andrew Heumann.   Hosted by

Badges  |  Report an Issue  |  Terms of Service