Grasshopper

algorithmic modeling for Rhino

Analysis
Display
Gems
Jewelry
Production
Profiles
Rings
Workbench

Ring half round

Component Index > Peacock > Rings > Ring half round

Creates a half round ring

Inputs

NameIDDescriptionType
PlanePlnBase planePlane
Regional systemRegRegional system to gauge rings. Plug a ValueList component to AutoList function. 0 => ISO (International Organization for Standardization). mm of circunference. 1 => European size. 2 => British size. 3 => American size. 4 => Japanese size.Integer
SizeSizeSize of ring. Plug a ValueList component to AutoList functionNumber
WidthWidWidth values. You can set: One value for uniform width. Two values for width at up and bottom. Three values for width at up, middle and bottom. Eleven values for non-uniform width. More values for non-uniform width increasing sections/resolution.Number
ThicknessThkThickness values. You can set: One value for uniform thickness. Two values for thickness at up and bottom. Three values for thickness at up, middle and bottom. Eleven values for non-uniform thickness. More values for non-uniform thickness increasing sections/resolution.Number
BulgeBlgBulge factor to adjust curvatureNumber
Soft edgeSoftSoften the edge between 0 ~ 1 (0 => Half round as brep, >0 => Rounded as surface).Number

Outputs

NameIDDescriptionType
RingRResulting ringBrep
GirdleGResulting girdle circleCircle

© 2018   Created by Robin Rodricks and Andrew Heumann.   Hosted by

Badges  |  Report an Issue  |  Terms of Service